Monaro®Charcoal Grillby Meco®For Customer Service, call 1-800-251-7558 or visit our web site at www.meco.netFOR OUTDOOR HOUSEHOLD USE ONLY. NOT FOR C
STEP 6-Continued Grill Body/Cart Assembly (See also page 11 for Wood Cart Assembly)· Carefully lay Grill Body Assembly on its back side with Front pan
FIG. AFIG. BView from insideBody/Leg AssemblyBoltBody SpacerWingnutView from back side ofBody/Leg Assemblyafter standing upSTEP 6-Grill Body/Wood Cart
STEP 7- Install Drip Pan, Charcoal Grate & Cooking Grid(ITEM 23) Charcoal Grate (ITEM 24) Cooking Grid12· Slide Drip Pan back into Grill Body. Mak
To reduce the risk of serious bodily injury or death:· Locate your charcoal in an open area away frombuildings, dry leaves, or brush.and at least 10 f
14STARTING A FIREFOR GRILLINGSTEP 1. Open the Hood and the Slide Vents.STEP 2. Remove the Cooking grids. Make sure theDrip Pan is pushed all the way i
15CARE AND MAINTENANCE1) Charcoal Grate-Remove and shake expended ashes into a safe receptacle or area. If any unburned charcoal, just leave it until
P/N 03.6077.01 REV. C 12/0616Aussie®®
2© Meco Corporation® 2005— NOTICE —MECO CORPORATION STRIVES TO BE A QUALITY SUPPLIER OF CONSUMER PRODUCTS. IFWE OMITTED ANY PARTS NEEDED FOR ASSEMBLY,
3PARTS ILLUSTRATIONS17 with Item 10 installed96 or 6A5432 or 2A10-See Item 72322202119171615141312112B3A4A5A11A17A18 or 18A6B8
PARTS LISTITEM DESCRIPTION PART #1 Owner's Manual 03.6077.01 1 1 12 Side Table (Metal Insert) 03.6495.00 -- 2 22A Side Table (Metal Insert ) 03.
· Lay Side Tables upside down on a flat surface. Side tables will fit on either side of grill.· Attach the two Fixed Legs to one Side Table. Align fou
STEP 2- Bottom Shelf/Leg Assembly(ITEM 5)1/4-20 x 1 3/8” Bolt (ITEM 6 or 6A)Bottom Shelf6· Place both Leg/Side Table Assemblies opposite each other a
STEP 3-Wheel Assembly(ITEM 9) Wheel(ITEM 8) Washer(Axle)(ITEM 10) Axle Nut7· Remove Axle Nuts from Axle. Insert Axle through both sides of Wheel Leg
STEP 4-Slide Vent Assembly(ITEM 13) Bolt, 6mm(ITEM 15)SleeveSpacer, 6mm(ITEM 16)Locknut, 6mm8· Open the Hood on the Grill Body.· Align slotted holes i
STEP 5-Hood Handle Assembly(ITEM 17) Bolt, 6mm x 90 mm(ITEM 18 or 18A) Hood Handle(ITEM 19) Handle Spacer(ITEM 16) Locknut6mmSTEP 6-Grill Body/Cart As
Comments to this Manuals